 | Top left - shows the corner after I
applied the fiberglass filler, initial sanding and primer. The corner
ended up fitting pretty well. |
| Top right - close-up of the same. |
| Middle left - above the arch.
This is where I ground out the air pockets before proceeding. |
| Middle right - You can see the low
spots where the corner had been hit before. |
| 3rd row left & right -
StraightLine body filler |
| Bottom left - After allot of sanding -
StraightLine is hard stuff. You can still see the joint line, so more
filler and sanding. It's getting close though. The darker primer
shows the problems better the the light gray. |
| Bottom right - you can still see the
joint here also. |
